STLR INP TRANSMIT TO
CURRENT OUTPUT
X
ñ
NOTE: X = Current output 0-4. Be sure current output selected is not
used by another function.
ÿü
to change,
õö
to choose,
ÿþ
to save
Definition: This parameter allows the STLR Hot Product Input signal to be
sent out as a 4-20 mA retransmission signal.
ÿø
TO ADVANCE TO NEXT SELECTION
STLR INPUT RECORDING
[RED]
[BLACK]
[BLUE]
[GREEN]
[NOT
RECORDED]
ÿü
to change,
÷
or
ø
to choose,
ÿþ
to save
Definition: This parameter determines if the temperature from the Hot
Product Probe input is printed to the chart, and if so, in which
color. The factory default is RED.
ÿø
TO ADVANCE TO NEXT SELECTION
STLR INP DISPLAY OPT
[IN BOTH MODES]
[IN
CONTINUOUS]
[IN
SEQUENTIAL]
[NOT
DISPLAYED]
ÿü
to change,
õö
to choose,
ÿþ
to save
Definition: This parameter, when active, will display the temperature inputs
(Primary - Secondary) from the Hot Product Probe.
ÿø
TO ADVANCE TO NEXT SELECTION
Revision 3.0
Section 5
5
