HWC SP DECIMAL POSITION
[0
THROUGH
3]
ÿü
to change,
õö
to choose,
ÿþ
to save
Definition: This parameter determines the active number of decimal
places shown for the HWC PID control setpoint as shown
on the user display.
ÿø
TO ADVANCE TO NEXT SELECTION
HWC NUMBER SETPOINTS
[0
THROUGH
1]
ÿü
to change,
õö
to choose,
ÿþ
to save
Definition: This parameter determines whether the PID controll is
active or not. A “0” de-selects the controller, while a “1”
will bring up the remainder of options.
ñ
NOTE: Toggling this value will immediately move to the STLR
menu system. Given we are making a change that may
adversely affect the system, the user is reminded to verify
the STLR setpoints before proceeding.
ñ
NOTE: If option set to “0”, no menu choices present beyond this
point.
ÿø
TO ADVANCE TO NEXT SELECTION
Revision 3.0
Section 6
28
