Anderson Group
Log Loader and Forestry Trailer – Operator's Manual
15
Table 4 — Optional Components
M-90
M-115
M-140
M-160
Hydraulic power unit
X
X
X
X
400 hydraulic winch
X
X
750 hydraulic winch
X
X
X
Three-position grapple
joystick
X
X
X
X
Telescopic stabilizer
X
X
X
Additional posts
X
X
X
Hydraulic adjustable
tandem
X
Loader bucket, either
30.48 cm (12 in.) or
50.8 cm (20 in.)
X
X
Auger, either 15.25 cm
(6 in.) or 22.86 cm (9
in.)
X
X
Dump box
X
X
1.3 Optional parts
The available optional parts depend on the log loader model (see Table 4).
1.3.1 Hydraulic power unit
With the hydraulic power unit, the hydraulic controls can be operated independently from the
tractor's hydraulic system.
NOTE:
This option is required when the M-90 log loader is used with an ATV.
The hydraulic power unit is placed on the safety barrier at the front of the loader. A valve holds the
oil pressure at 2,450 psi and must NEVER be adjusted. The hydraulic oil level (TDH hydraulic oil)
must be kept at 7.5 cm (3 in.) from the cap.
M- 90: The hydraulic power unit consists of a 5.5 hp Honda engine, a 10 Lpm (2.64 US gpm)
hydraulic pump and a 15 L (3.96 US gal.) oil tank.
Other models: The hydraulic power unit consists of a 13 hp Honda engine, a 26 Lpm (6.87 US gpm)
hydraulic pump and a 36 L (9.51 US gal.) oil tank.
