Anderson Group
Log Loader and Forestry Trailer – Operator's Manual
43
5 Operation
NOTE:
If you are using the log loader
in cold weather
, idle the hydraulic power
unit or tractor engine for several minutes before operating the hydraulic
controls. This lets the oil heat up. Let the oil circulate for another few
minutes before handling a load.
To prevent damage, never turn the boom all the way to one side at full
speed
in cold weather
. This could cause damage.
5.1 Controls
The following figures illustrate the hydraulic controls for each loader model. Their functions are
described in the table below.
Figure 18 — M-90 Hydraulic Controls