English
5
Installation
1. Connect the attached power adapter to the HDD
2.1.
2. Connect the USB-cable to the HDD 2.1 and
connect the other end to your computer.
Insert 2.5” or 3.5” SATA Hard Drive into the slot
Plug
in the HDD upright.
Removal
Warning: Please power down the HDD 2.1 by
pressing the power button to ensure safe removal
of the hard drive(s). Do not remove the hard drive(s)
when the disc is reading or writing
Driver Installation
Windows 2000/XP/VISTA/7/8
No drivers are necessary when using Windows 2000/XP/VISTA/7/8. If
the hard drive does not appear under My Computer, be sure to enter disc
management in your control panel to partition your hard drive.
Mac OS 9.0 or later
No drivers are necessary when using Mac OS 9.0 above. If the hard drive
does not appear on the desktop, be sure to partition your hard drive.
Mac OS 8.6
´
Unplug the HDD 2.1 if you currently have it connected.
´
USB Mass Storage Support 1.3.5 must be installed on your system.
If it is not, you can download the USB Mass Storage Support 1.3.5
from the Apple Software Updates website: http//www.apple.com/
support.
´
Follow the direction associated with the USB Mass Storage Support
driver to install.
´
Repeat the steps listed under “Connecting to your computer”.