background image

If your lancing device differs from the one shown here, please 
refer to the manufacturer’s manual to ensure proper usage.

To reduce the chance of infection:

● 

Never share a lancet or the lancing device.

● 

Always use a new, sterile lancet. Lancets are for single use 

only.

● 

Avoid getting hand lotion, oils, dirt, or debris when handling 

the lancets.

Stimulating blood perfusion by rubbing the puncture site prior to
blood extraction has a significant influence on the glucose value 
obtained. Blood from a site that has not been rubbed exhibits a 
measurably different glucose concentration than blood from the 
finger. When the puncture site was rubbed prior to blood 
extraction, the difference was significantly reduced.

On the lancets and the lancing device.

Please follow the suggestions below before obtaining a drop 
of blood:

  

Rub the puncture site for about 20 seconds before penetration.

  Select the puncture site either at the fingertips or another 

    body

    part  (please see section “Alternative Site Testing”

    (AST) on how to select the appropriate sites).

  Clean the puncture site using cotton moistened with 70% 

    alcohol and let it air dry.

Summary of Contents for ADF-B27



















Reviews: