2.Press “M” again, the most recent test results with date and time
will display. Press “M” once more and the next most recent test
results will appear. Each time you press and release “M”, the
meter will recall up to your last 500 test results in order. Press
the “S” to turn off the meter. When the memory is full, the oldest
result is dropped and the newest result is added.
FCC warning
CARE AND STORAGE FOR YOUR SYSTEM
◆
Handle the meter with care. Dropping or throwing the meter
may cause damage to the device.
◆
Don't expose the Blood Glucose Monitoring System, Test strip,
and Control Solution, to extreme conditions, such as high
humidity, heat, freezing cold or dust. The storage conditions
for the test strips are 39
86 , Humidity
＜
85%RH. Storage
conditions for the meter are -40
131 , Humidity
＜
80%RH.
◆
Always wash your hands with soap and water and rinse and
dry completely before handling the Blood Glucose Monitoring
system and Test strip.
◆
Use CaviWipes (see below) to clean the Blood Glucose Monit
oring System.
◆
Discard the used lancet into a container for sharp objects.
Cleaning and Disinfection
The cleaning and disinfection is absolutely necessary for
the test procedure, because cleaning can insure the meter
works well (for example, display will be clear to see after
cleaning); and disinfection can avoid the infection to you
or to the other people, and the cross-infection. We strongly
warn that the device should be cleaned and disinfected
following use on every patient.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
