5
digital magnification is reached.
Use the Down button(
‘
V Button
’
) to decrease the digital
magnification.
Using a Micro SD Card to Save Images
By using a Micro SD card (not provided, please purchase separately), you can save images and videos
to review later or export to a computer or other device .
Insert the Micro SD card in to the TF slot on top back of the monitor. (be careful with the direction.
The side which has metal exposed should face down. See the picture 6 ) Push it in until you hear a click.
(If you don't push it in far enough, it will be ejected. )
The ‘M’ button (Mode button) can be used to cycle between three modes: video standby ( ), still
image ( ), and review (
). In video standby mode, there shows 'time' & ‘1080FHD’ (white
color font) at the top right of the display. The 'time' means how many time the rest storage of the card
would allow you to record video. The ‘1080FHD’ means the video resolution is 1080FHD in this mode.
To record videos
In the video standby(
), press the OK button briefly to begin recording. The elapsed time(red color
font) in the recording will appear at the top right. To stop recording, short press the OK button again.
The OK button on the remote has the same function.
To Capture pictures
There are two ways to capture pictures.
1. In the recording video mode (
), press the Picture Capture button(Marked with a camera) briefly to
capture an image.
2. In the still image mode (
), press ‘OK’ button to capture an image. The picture capture button and
‘OK’ button on the remote has the same function.
Note: You can’t take pictures or videos in review mode
Reviewing and Managing Images
To review and manage images on the display, short press the ‘M’ button to select review
mode. Use the Up and Down buttons to cycle through the pictures and videos.
To play a video, short press the OK button to start play. Press the OK button again to pause. Press ‘M’
button to stop playing the current video.
Hit the ‘M’ button again to exit review mode.
While reviewing a still image or video,
the Menu button can be used to provide
additional options. Press the Menu button and hold for a while till options show up.
Delete:
Delete Current: deleting just the current image/video;
Delete All: deleting all unprotected images and videos;
Protect:
Lock Current/All: provides protection for the current/all image/video from deleting accidentally, but
not from Format function;
Unlock Current/All: unlock the current/all image/video.
Settings
In each mode, press the M button and hold it for a while until the Video/Still image/Review Menu
shows up on the display(Or you can press MENU button on the remote). Short press M button again,
get into the general Setup Menu.
For example, if you are in Video standby mode, and you long press MENU, this is the first menu
