40
EN
TigIR magnifier eyepiece 3.5x
Although the TigIR-Z™ was actually developed as a
clip-on for cameras and spotting scopes, it can also be
used as a handheld device with a plug-in eyepiece with
3x magnification and a weight of 90g/3.18oz. Thus
the 8° angle of view of the objective lens is raised to
24°, which corresponds to 3x optical magnification.
Adjustable from +3 to -3 diopters. With the digital
zoom, magnifications of 2.4x, 3x, 6x, 12x and 18x can
be achieved (TigIR-3Z™: 4.8x, 6x, 12x, 24x and 33x).
Due to the integrated AI image processing, the image
hardly „pixels“, even at high digital magnification.
No. 250250
Optics with e.g. 80mm objective diameter
Camera adapter for different objective lens diameters
(sold separately)
Adapter thread M52x0.75 (ARM52)
Mounting options
The TigIR-Z™ is fully compatible with the universal
Rusan system ARM52 / AD540. It provides a suita-
ble adapter for basically every lens outer diameter
of your camera or spotting scope (30mm-80mm or
1 3/16“ - 3 5/32“).
The application is very easy: the adapter is simply
screwed onto the thread on the eyepiece side of the
TigIR™and can be secured in the optimal position by
turning the clamping screw counter-clockwise until
the adapter cannot be twisted any more.
The other side of the adapter is then slid onto a spot-
ting scope, for example, and locked with the lever.
Once this has been done, collimation can also
be performed, but this is rarely necessary as the
TigIR-Z™ is already pre-collimated at the factory.
Screw in the clamping screw
Please use only the clamping screw for securing.
Other screws around the eyepiece lens must not
be manipulated in order to keep the adjustment
of the lens.
