4
Appliance Diagram
Paddle
Jug
Housing
Ice crushing chamber
Lid/on and off switch
Fine/coarse crush selector
1.
Make sure the unit is unplugged and
place it on a clean, dry surface.
2.
Place the ice crushing chamber into the
housing and make sure it is secure on
the shaft.
3.
Twist the shaft in the direction of the
arrow (anti
-
clockwise) to lock it into
position.
4.
Place the paddle in the jug, and if you
are mixing ice with other ingredients
place those in the bowl alongside it.
5.
Slide the jug into the housing and turn it
clockwise. This lets the paddle mix ice
and ingredients when the operation
starts.
6.
Turn the selection knob to the desired
setting for fine or coarse ice.
7.
Place the ice into the chamber. Do not
fill ice above the max line.
8.
Plug the unit into the wall.
9.
To switch the appliance on, place the lid
onto the housing and turn it anticlock-
wise to lock the machine. It will now
start to crush ice.
Please note:
This appliance can only be
run for one minute consecutively.
After five 1
-
minute
-
cycles let the motor
cool for 30 minutes.
Directions for Use
