Purpose
Proprietary Data
Information and
Assistance
Notice
The purpose of this manual is to provide installation and preventive maintenance
required to support the 2.4M SNG Antenna Assembly and Motor Drive System. This
manual is subdivided into six sections to provide convenient reference for operator/ser-
vice personnel requiring technical information on general system and equipment.
A separate user’s manual is provided with each RCI 3000 or 3050 control system.
The technical data contained herein is proprietary to Andrew Corporation. It is intended
for use in operation and maintenance of Andrew supplied equipment. This data shall not
be disclosed or duplicated in whole or in part without express written consent of Andrew
Corporation.
Andrew Corporation provides a world-wide technical support network. Refer to the tech-
nical assistance portion of this this manual for the contact numbers appropriate to your
location.
The installation, maintenance, or removal of antenna systems requires qualified, experi-
enced personnel. Andrew installation instructions have been written for such personnel.
Antenna systems should be inspected by qualified personnel to verify proper installation,
maintenance and condition of equipment.
Andrew Corporation disclaims any liability or responsibility for the results of improper or
unsafe installation and maintenance practices.
All designs, specifications, and availabilities of products and services presented in this
manual are subject to change without notice.
Copyright © 1998, Andrew Corporation
3
Introduction
Introduction
