4
November-2007
Bulletin II-102051-EN • Revision B
Bias Tees are installed on the antenna ports of one of the base stations. The diplexers must pass
DC through that branch. DC blocks must be present in the other branch, either integral to the
diplexers or in external devices as shown.
#
1
+
. / 0
In Figure 2, dual-band, diplexed Andrew OneBase™ TMAs are used with shared feeders and
shared antennas. OneBase™ diplexers at the BTS level incorporate DC redundancy circuitry,
automatically routing the DC to the feeder and blocking the opposite branch.
Figure 2: OneBase™ diplexed TMA system
Summary of Contents for Multimode Power Distribution Unit
Page 1: ...Installation and Operation User Guide...
Page 2: ......
Page 4: ...iv November 2007 Bulletin II 102051 EN Revision B 0 1...
Page 31: ......