background image

Wanguard 6.2 User Guide

Configuration » Components » Filter Cluster

Configuration » Components » Filter Cluster

The functionality of Wanguard Filter is described in the “Choosing a Method of DDoS Mitigation” chapter on 

page 10. 

If you do not plan to use Filter Cluster(s) you can safely skip this chapter.

 

To add a Filter Cluster, click the <+> button found in the title bar of the Configuration » Components panel.  

To configure an existing Filter Cluster, go to Configuration » Components and click its name. 

The 

Filter Cluster Configuration

 window contains the following fields:  

Filter Name 

– A short name that helps you identify the Filter Cluster. 

Graph  Color

– The color used in graphs for the Filter Cluster. The default color is a random one, which 

can be changed by entering a different HTML color code or by clicking the drop-down menu.

Device  Group

– Optional description used within Console to group up components (e.g. by location or  

role). It can be used to restrict the access of Guest accounts.

Reports Visibility

 – Enable if the Filter Cluster should be listed inside Reports » Components. 

Server Topology

 – Select the network topology of the server running the Packet Filter:

Layer  2/3  -  Inline  filtering

  –  Filter  Cluster  runs  on  a  server  that  resides  in  the  main  data  path,  

configured as a network bridge or as an OSI Layer 3 router. 
To enable routing on the filtering server follow the steps required by your Linux distribution. At least  

the following command needs to be executed: 

sysctl -w net.ipv4.ip_forward=1; 
sysctl -w net.ipv4.conf.all.forwarding=1; 
sysctl -w net.ipv4.conf.default.rp_filter=0; 
sysctl -w net.ipv4.conf.all.rp_filter=0

To  run  Filter  Cluster  in  this  mode,  set  the  interface  connected  to  the  peering/border  router  as  

Inbound  Interface.  To  inject  the  packets  back  into  the  network,  set  a  core  router  as  the  default  

gateway,  reachable  through  the  Outbound  Interface,  either  directly  (recommended)  or  through  a  

GRE/IP in IP tunnel. 
To  configure  the  filtering  server  as  a  network  bridge,  follow  the  steps  required  by  your  Linux 

distribution. To run Filter Cluster in this mode, set the Inbound Interface to the bridged interface,  

usually br0.

Inline monitoring

 – Filter Cluster runs on a server that resides in the main data path, configured as 

an OSI Layer 3 router or as a network bridge. Direct filtering is disabled, but Filter Cluster can still  

generate filtering rules that improve the visibility of attacks, which can be applied to other in-line  

appliances  or  firewalls.  To  run  Filter  Cluster  in  this  mode,  set  the  parameters  like  in  the  Inline  

filtering mode. 

Layer  2/3  -  Out-of-line  filtering

  –  To  run  Filter  Cluster  in  this  mode,  set  the  Traffic  Diversion 

- 64 -

Summary of Contents for wanguard 6.2




































































































































Reviews: