S T E P 1
Tilt one of the modules carefully on to the back. When the sofa is standing on the back -
take notice of the pre-drilled holes in the wooden frame.
S T E P 2
Place the linking brackets over the pre-drilled holes and fasten with the supplied screws
using a screwdriver.
S T E P 3
When the brackets are firmly attached to the module - carefully lift the module back on
the feet again.
S T E P 4
Two persons are needed for this step. Do not assemble the modules on your own.
Take the next module which is supposed to be attached to the first module and lift it over
the brackets and carefully put the module down over the brackets from the other module.
Make sure that both modules are firmly standing on the ground.
Pre-drilled holes
