15
PicoBox and Chassis Assembly Instructions
Step 13:
Place a PicoBox Spacer (am-3406)
over each of the four 1/4-20 screws on the side
of the Inside Plate with two flanges.
Step 12:
Insert four 1/4-20 x 1.75" Button Head
Screws (am-1420) into the side of the Inside
Plate with a single solid flange.
Step 15:
Secure with four 1/4-20 Nylock Jam
Nuts (am-1102).
am-1306
Step 16:
Repeat Steps 1-15 to create another PicoBox - TileRunner Inside Plate Assembly.
Step 14:
Insert the Center Axle of the Gearbox
Assembly into the center bearing on the
TileRunner Inside Plate. Align the four 1/4-20
screws with the four 0.25 in holes on the
PicoBox Plate and push the assembly together
until the PicoBox Plate is flush with the PicoBox
Spacers.
