Anemoment LLC
5
Data Logger 422 User Manual
Chapter 2: Specifications and Safety Information
Specifications
Equipment Ratings
Please note the following important information:
Table
1:
Equipment Ratings
Supply Voltage
5 – 60 VDC
Power
400mW (when no sensor is connected)
Environment
Outdoor, Wet Location
Altitude
5000 meters
Temperature
-20° to +72° C
Relative Humidity
0 to 100%
Transient Overvoltage
Category I
Temporary Overvoltage
60V
Pollution Tolerance
Level 3 (enclosure must be intact and in good
condition)
Ingress Rating (IEC 60539 2
nd
Ed.)
64
Safety Information
The DL422 is a scientific instrument intended to be used and handled by trained professionals only.
Protect DL422 from public access.
B
ATTERY
W
ARNING
:
Keep Out of Reach of Children.
The DL422 contains one lithium coin cell CR1225
battery to power the internal clock. Dispose of battery properly after use following local regulatory
guidelines.
P
OWER
S
UPPLY
W
ARNING
: Use only batteries or LPS power supply certified with local standards to
power the DL422.
Anemoment is not responsible for any harm or safety issue caused by supplying
the product with uncertified batteries, power supplies or circuits.
C
AUTION
:
Electric Shock Risk.
Turn off power supply or external battery before unplugging power
connector from DL422.
C
AUTION
: Protect from Electrostatic Discharge.
The exposed DL422 circuit board contains
Electrostatic Sensitive Components. Use appropriate ESD Handling procedures when working with
the exposed circuit board.
Care Instructions
Wipe exterior surfaces with a soft lint-free cloth. The cloth may be moistened with water.
Consumable Materials
•
Coin cell CR 1225 battery
. Replace as needed and dispose of used battery properly after use
according to local regulatory guidelines.
•
MicroSD Card.
Replace as needed and store in dry and secure location. Dispose properly as necessary
according to local regulatory guidelines.
2
