Anest Iwata IS875HT Instruction Manual Download

Page: 4 / 13

－４－

Below is important information regarding safe operation. Before operation, be sure to
read and understand the contents.

WARNING

Install in an area which is free of volatile or flammable gases
(acetylene, propane, etc.).

※They can cause explosion or fire.

Be sure to turn off main electric source by pulling out electric
plug or turning off switch of breaker before inspection.

※If not, it can cause electric shock.

Never touch turning section while main electric source
is turned on. ※If done, hands can be entangled.

Be sure to ground.

※If not, it can cause electric shock or fire.

Never use to compress gases other than air.

※If done, it can cause explosion, fire or damage.

Never use with respiratory equipment or life support system which
directly draws in compressed air. If done, it can be harmful.
SAFEGURD mush be used for such equipment.
Not recommended for use other than airbrush application.

Never install outdoors.

※The compressor is not of water-proof construction. If water

comes in contact with electric equipment, it can cause
short-circuit or fire.

CAUTION

Do not directly touch any section of compressor during operation
or soon after operation.

※ It may cause burn.

Compressed air contains drain (moisture, dust and etc.)
Use of air filter is highly recommended as drain may interfere with
the proper operation of the air compressor.

※ Please contact Airbrush Team for any questions.

Use at ambient temperature of ０℃～４０℃（during operation

※Drain will freeze at less than ０℃ and cause failure

More than ４０℃ will cause shorter lifetime or damage. Install in a safe area.

Install in a safe area.

Turn off electric source.

Use at designated temperature

Install in a safe area.

Moisture and Air dust

Do not touch

Conect ground wire

Never use to compress gaese other than air