IMPORTANT
This spray gun should be operated only by an adequately trained operator, for safe use and maintenance of the equipment. Any
misuse or handling other than those indicated in this Instruction Manual is not covered by guarantee. ANEST IWATA disclaims
all responsibility for any accident or damage caused by failure to observe the operational and safety procedures in this manual.
In the interest of user friendliness, this manual contains information in a brief and concise form.
For any additional information you may require regarding spray gun operations, or if any missing parts or any damage during
transportation is found, please contact your nearest ANEST IWATA Company (see last cover page).
IMPORTANT SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Manufactured by:
ANEST IWATA Corporation
3176,Shinyoshida-cho, Kohoku-ku, Yokohama, 223-8501 Japan
Instruction Manual
Max. Pressure:
6.8 bar (98 PSI)
Max. Temperature:
Noise Level (LAeqT)
76.8 dB (A)
Atmosphere
5 ~ 40 °C
Spray conditions
Recommended
Air and fluid
5 ~ 43 °C
Measuring point
1m backwards from gun, 1,6 m height
Air connection:
G 1/4”
Fluid connection:
G 3/8”
This
ANEST IWATA
spray guns kit complies to ATEX regulations 94/9/EC, protection level:
II 2 G X Suitable for using Zones 1 and 2.
X marking: Any static electricity discharge from the spray gun is to be diverted to the ground via the conductive air hose as stipulated.
W 200 WB SPRAY GUN
Before use, adjustment or maintenance, it is important to read this instruction manual very
carefully. This manual must be stored in a safe place for any future reference that may be necessary.
GB
MJ1435-05EREV
.03
Be sure to observe warnings and cautions in this instruction manual.
If not, it can cause paint ejection and serious bodily injury by drawing organic solvent.
Be sure to observe following marked items which are especially important.
WARNING
Indicates a potentially hazardous situation which, if not avoided, may result in serious injury or loss of life.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or pro-
perty damage.
IMPORTANT
Indicates notes which we ask you to observe. The safety precautions in this instruction manual are the mini-
mum necessary conditions. Follow national and local regulations regarding fire prevention, electricity and
safety as well as your own company regulations.
Model
Nozzle orifice
Air pressure
Air
Fluid output
Pattern
Air cap
Weight
at gun inlet
consumption
width
mm (in)
bar (PSI)
l/min (cfm)
ml/min
mm (in)
g (lbs)
High T.E.C. W200 WB Pressure feed
W200-WB-081P
0.8 (0.031)
200
360 (14.2)
W200-WB-101P
1.0 (0.039)
250
360 (14.2)
W200-WB-121P
1.2 (0.047)
300
380 (15.0)
High T.E.C. W200 WB Suction feed
W200-WB-162S
1.6 (0.063)
170
315 (12.4)
W200-WB-182S
1.8 (0.071)
200
330 (13.0)
380
(0.84)
WB1
WB2
340 (12)
1.6 (23)
2.0 (29)
430 (15)
ANEST IWATA Italia S.r.l.
46, Corso Vigevano 10155, Torino (Italy
)
Tel. d39 011 - 24 80 868 - Fax: +39 011 - 85 19 44
info@anest-iwata.it
www.anest-iwata.it
ANEST IWATA Iberica
Calle de Les Teixidores, 3-5
08918 - Badalona (Barcelona)
Tel.:+34 933 20 59 93 - Fax.:+34 933 20 59 65
info@anest-iwata.es
www.anest-iwata.es
ANEST IWATA Europe s.r.l.
NIEDERLASSUNG DEUTSCHLAND
Mommsenstrasse 5, 04329 Leipzig
Telefon: +49 (0)341 241 4430 - Fax: +49 (0)341 252 5595
info@anest-iwata.de
www.anest-iwata.de
ANEST IWATA Europe S.r.l.
46, Corso Vigevano 10155, Torino Italy
Direct Tel. +39 011 - 22 74 402
Fax +39 011 - 22 74 000
info@anest-iwataeu.com
www.anest-iwataeu.com
ANEST IWATA Scandinavia
Ögärdesvägen 6C, 433 30 PARTILLE - Sweden
Tel. +46 (0)31 - 340 28 60 - Fax +46 (0)31 - 340 28 69
info@anest-iwata.se
www.anest-iwata.se
ANEST IWATA France
25 rue de Madrid - 38070 St Quentin Fallavier - France
Tél. +33 (0)4 - 74 94 59 69 - Fax +33 (0)4 - 74 94 34 39
info@anest-iwata.fr
www.anest-iwata.fr
ANEST IWATA U.K.
Unit 10 Little End Road - Eaton Socon
St. Neots - CAMBRIDGESHIRE
PE19 8JH
Tel.: +44 (0) 1480 405419 Fax: +44 (0) 1480 217610
enquiries@anest-iwata.co.uk
www.anest-iwata.co.uk
European Sales Branches:
