background image

10

WARRANTY

Sprue Safety Products Ltd warrants to the original 
purchaser that its enclosed smoke alarm be free 
from defects in materials and workmanship under 
normal residential use and service for a period of 5 
(five) years from the date of purchase  Provided it is 
returned with postage prepaid and proof of purchase 
date, Sprue Safety Products Ltd hereby warrants that 
during the 5 (five) years period commencing from 
the date of purchase Sprue Safety Products Ltd, at its 
discretion, agrees to replace the unit free of charge  
The warranty on any replacement SA300-AE-UK 
alarm, will last for the remainder of the period of the 
original warranty in respect of the alarm originally 
purchased – that is from the date of original purchase 
and not from the date of receipt of the replacement 
product  Sprue Safety Products Ltd reserves the right 
to offer an alternative product similar to that being 
replaced if the original model is no longer available 
or in stock  This warranty applies to the original retail 
purchaser from the date of original retail purchase 
and is not transferable  Proof of purchase is required 
This warranty does not cover damage resulting 
from accident, misuse, disassembly, abuse or lack 
of reasonable care of the product, or applications 
not in accordance with the user manual  It does not 
cover events and conditions outside of Sprue Safety 
Products Ltd’s control, such as Acts of God (fire, 
severe weather etc )  It does not apply to retail stores, 
service centres or any distributors or agents  Sprue 
Safety Products Ltd will not recognise any changes to 
this warranty by third parties 
Sprue Safety Products Ltd shall not be liable for any 
incidental or consequential damages caused by the 
breach of any expressed or implied warranty  Except 
to the extent prohibited by applicable law, any 
implied warranty of merchantability or fitness for a 
particular purpose is limited in duration for 5 (five) 
years 

This warranty does not affect your statutory rights  
Except for death or personal injury, Sprue Safety 
Products Ltd shall not be liable for any loss of use, 
damage, cost or expense relating to this product 
or for any indirect, or consequential loss, damages 
or costs incurred by you or any other user of this 
product 

Summary of Contents for SA300-AE-UK













Reviews: