- 11 -
3269850_ut_GB_rev.1
ENGLISH
GB
FILTERING OIL
To carry out this operation, proceed as follows.
Important
Before proceeding, allow the appliance to cool
for 10÷15 min., so that the oil reaches a tempe-
rature between 50÷120.
1)
Open the hatch
(A)
.
2)
Fit the extension
(B)
onto the tap
(C)
.
3)
Place the container
(D)
and the fi lter
(E)
, both
available as optionals, underneath the extension
(B)
.
4)
Turn on the tap
(C)
to empty the well.
5)
Turn off the tap
(C)
on completion of the opera-
tion.
6)
Close the hatch
(A)
.
Caution - Warning
Do not dump oil in the environment; dispose
of it in accordance with the laws in force in the
country of use.
A
B
C
C
E
D
RESETTING THE APPLIANCE
If the safety thermostat is tripped, the applian-
ce has to be restored to the initial working
conditions as follows.
1)
Allow the oil to cool to 30÷40°C.
2)
Open the hatch
(A)
.
3)
Press the button
(B)
of the safety thermostat
tripped to restore the gas supply.
Important
To identify the thermostat that has been trip-
ped, check which burner has cut out and press
the corresponding button.
4)
Close the hatch
(A)
.
B
A
A
