- 7 -
3269870_ut_GB_rev.2
ENGLISH
GB
SAFETY WARNINGS AND INSTRUCTIONS CONCERNING ENVIRONMENTAL IMPACT
Every organisation is obliged to apply proce-
dures to identify and monitor the eff ects of
its operations (products, services, etc.) on the
environment.
The procedures for identifying signifi cant en-
vironmental impacts must consider the factors
listed below.
– Atmospheric emissions
– Discharge of liquid effl
uents
– Waste management
– Soil contamination
– Use of raw materials and natural resources
– Local problems relating to environmental
impact
For this purpose, the manufacture supplies
information which must be considered by all
those authorised to interact with the appli-
ance during its expected lifetime, in order to
prevent environmental impact.
– All packaging materials must be disposed of
in accordance with the relevant laws in the
country of use.
– During use and maintenance, do not dump
pollutants (oils, fats, etc.) in the environment;
implement separate disposal as appropriate
to the composition of the various materials
and in compliance with the relevant laws.
– If the appliance is scrapped, sort all compo-
nents by characteristics and dispose of them
separately.
Important
Do not dump pollutant material in the envi-
rorment. Dispose of it in compliance with the
relevant laws
.
Caution - Warning
Do not obstruct the fl ue to avoid the tempera-
ture of the combustion components and prod-
ucts from increasing excessively over the admis-
sible limits.
Caution - Warning
The batch load max is 5 Kg for single
well
(0N1FR1ID - 0T1FR1ID - 1N1FR2ID -
1T1FR2ID)
.
Caution - Warning
The batch load max is 5 Kg for single well
(0N1FR7ID - 0T1FR7ID)
.
