- 8 -
IT
AUS
DE
FR
ES
FILTERING OIL
To carry out this operation, proceed as follows.
Important
Before proceeding, allow the appliance to
cool for 10-15 min., so that the oil reaches a
temperature between 50 and 120°C.
1- Open the hatch (
A
).
2 - Fit the extension (
B
) onto the tap (
C
).
3 - Place the drain container (
B
) and the filter (
D
),
both available as optionals, underneath the ex-
tension (
E
).
4 - Turn on the tap (
C
) to empty the well.
5 - Turn off the tap (
C
) on completion of the opera-
tion.
Caution - warning
Do not dump oil in the environment; dispose
of it in accordance with the laws in force
in the country of use.
RESETTING THE APPLIANCE
If the safety thermostat is tripped, the appliance
has to be restored to the initial working condi-
tions as follows.
1- Allow the oil to cool to 30-40°C.
2 - Open the hatch (
A
).
3 - Press the button (
B
) of the safety thermostat
tripped to restore the gas supply.
4 - Close the hatch (
A
).
LENGTHY APPLIANCE DOWNTIMES
If the appliance is to be out of use for a lengthy period,
proceed as follows:
1- turn off the gas supply tap;
2 - clean the appliance and the surrounding areas
thoroughly;
3 - spread a film of edible oil over the stainless steel
surfaces;
4 - carry out all the servicing procedures;
5 - leave the appliance uncovered and the cooking
chambers open.
USEFUL ADVICE FOR USE
To ensure correct use of the appliance, the following
rules should be adopted:
– use only the accessories recommended by the
constructor;
– use the baskets as appropriate;
– before filling the well, check that the drain tap (
A
) is
turned off;
– check that the oil level never drops underneath the
minimum level marked (
B
);
– use single-seed oils or blends of oils specially rec-
ommended for fryers;
– melt solid fats in a separate container to avoid dam-
aging the appliance;
– do not use the appliance until the oil is at working
temperature;
– lower the basket slowly to prevent foaming;
A
C
B
E
C
D
IDM-39603310800.tif
B
A
IDM-39603310900.tif
