Installation & Setup
6
7
Receiver Setup
CATV2400 Remote Control
Go to the location of the Receiver. Make
sure the power is on and then select the
desired RF channel by pushing the CH
button on top of the receiver. (Any chan-
nel is OK) As long as you select the same
RF channel on the transmitter.
Install the batteries in the the rear pocket of the AngelTrax
remote control correctly. Place the battery cover on the
remote.
Press the channel button on top of the
receiver selecting the same RF chan-
nel selected on the transmitter. A red
light will appear indicating the chan-
nel.
Make sure your TV is ON and it is
set to Video, Input 1, AV1, etc...
4
