Model 180S Seamer
6 OF 9
9/22/99 - 18033005
5. CELL DESCRIPTIONS AND OPERATION CONTINUED;
A. PAGE 0. MAIN SEAMER CONTROL.
A 12. MESSAGE DISPLAY
WHEN THE MEMBRANE KEY IS PRESSED AND THE CURSOR IS AROUND THE MIESSAGE
DISPLAY CELL, THE CONTROL LABELS ASSOCIATED WITH THIS SELECTOR IS DISPLAYED AS
“PRESS FOR NEXT MIESSAGE” AND “ANNUNCIATOR RESET”. BY PRESSING EITHER HARD
PUSH BUTTON WILL CAUSE THE DISPLAY TO EITHER CHANGE TO THE NEXT MESSAGE OR
DELETE THE DISPLAY.
B. PAGE 1. SEAMER ALARM SCREEN
B 1. START/STOP SEANER
SAME AS ON PAGE 0, FOR START/STOP SEAMER
B 2. FILLER DRIVE CLUTCH
WHEN THE MEMBRANE KEY IS PRESSED AND THE CURSOR IS AROUND THE FILLER DRIVE
CLUTCH CELL. WITHIN THE CELL THIS INDICATOR WILL SHOW THE STATUS OF THE FELLER
DRIVE CLUTCH BY THE FOLLOWING TEXT;
B 2.1
ENGAGED (NORMAL)
B 2.2
DISENGAGED
B 3. AC MOTOR DRIVE
WHEN THE MEMBRANE KEY IS PRESSED AND THE CURSOR IS AROUND THE AC MOTOR
DRIVE CELL, THE CONTROL LABEL ASSOCIATED WITH THIS SELECTOR IS DISPLAYED AS
“DRIVE FAULT RESET”. BY PRESSING THE HARD PUSH BUTTON, THE DRIVE IF FAULT-ED WILL
BE RESET. WITHIN THE CELL WILL SHOW THE STATUS OF THE AC MOTOR DRIVE BY THE
FOLLOWING TEXT;
B 3.1
NORMAL
B 3.2
FAULTED
B 4. TURRET INFEED
WHEN THE MEMBRANE KEY IS PRESSED AND THE CURSOR IS AROUND THE TURRET INFEED
CELL, WITIHN THE CELL TIUS INDICATOR WILL SHOW THE STATUS OF THE TURRET INFEED
SWITCH BY THE FOLLOWING TEXT;
B 4.1
NORMAL
B 4.2
JAM
B 5. FAULT INTERLOCKS
WHEN THE MEMBRANE KEY IS PRESSED AND THE CURSOR IS AROUND THE FAULT
INTERLOCK CELL, WITHIN THE CELL THIS INDICATOR WELL SHOW THE STATUS OF JAM STOP
FAULT, BY THE FOLLOWING TEXT;
B 5.1
NORMAL
B 5.2
RESET REQUIRED
