10
English
English
11
Step 4 Install the Mounting Plate
1. Route the cable through the mounting plate.
2. Fix the mounting plate into the interior doorframe using the mounting plate screws.
Make sure the screws go through the holes of the deadbolt and the mounting plate,
and lock into place. If the mounting plate fits perfectly with the door, go to Step 5.
3. If the mounting plate is not fastened tightly to the door, use an additional screw.
What is required: Mounting Plate, Mounting Plate Screws, Deadbolt Screw / Strike
Screw, Screwdriver (not provided)
Deadbolt Screws /
Strike Screws
Mounting Plate
Screwdriver
Mounting Plate
Screws
1
2
3
Step 5 Install the Interior Assembly
To install the Interior Assembly:
1. Remove the battery cover.
2. Match the wire connector from the circuit board with the one from the interior
assembly as illustrated. The wire connector can be plugged into the socket in one way
only. Make sure you match the dot on the connector with the pin on the circuit board
correctly.
3. Align the tailpiece with the key cylinder.
4. Secure the provided screws into the interior assembly.
5. Turn the thumb-turn to check whether the deadbolt is retracted. If the deadbolt
does not work smoothly, adjust screws and install the mounting plate again.
6. Use the plug to cover the screw hole at the bottom of the smart lock.
What is required: Interior Assembly, Interior Assembly Screws, Screwdriver (not
provided), plug
Screwdriver
Interior Assembly
Interior Assembly
Screws
1
2
3
