44
|
Mount the mounting frame with the opening
to the front and from the bottom of the cash
register desk.
The front edge of the mounting frame is
closed with the front edge of the UCDM.
As an aid for fixing a commercial screw
clamp is conceivable.
The screw holes of the mounting frame
have a diameter of 4.5 mm.
For mounting on the cash register desk, you
need 14 screws, which are not included in
the delivery.
Make sure that the mounting plate for mounting the UCDM mounting
frame is sufficiently load-bearing, and that the screws used can also
support the weight of the filled UCDM including all loads due to the
intended use of UCDM.
Push the UCDM into the mounting frame
from the front.
To secure the situation, the UCDM is
screwed to the mounting frame as shown
below.