Assembly Method
Note: the below illustrations are for reference only.
Place the massage petal
（
2
）
into suction tee
（
3
）
. Ensure to cover the edge of the suction tee with
the groove of the massage petal to ensure a close match.
Place the gas check valve (6) on the bottom of the suction tee (3) as shown.
Note: Carefully hold the gas check valve to prevent damage. Do not use the gas check valve if it is
damaged. Replace it with a new one.
Screw the milk bottle (7) into the bottom of the suction tee (3), and connect the air pipe (9) with the
main engine (8) as shown in the above illustration. Ensure to insert tightly to prevent air leakage.
First, put silicone suction cap (5) into suction tee (3), Ensure to cover the suction tee edge with the
edge groove of silicone suction cap . Then press the suction strap cap (4) onto the suction tee. Refer
to the above illustration.
1.
Operation instructions
4
plus key gear reduction key .
The machine has 4 keys in total: on-off key
lactation and suction mode switch key
gears
