4
FOR THE FIRST USE
As there is manufacturing residue or oil remained in the toaster or heat element,
usually it will emit an odor for the first use. It is normal and will not occur after
several times of usage. For the first use, it is suggested the operation should be
followed according to below steps, except without bread, then let the toaster cool
down and begin toasting the first slice.
CAUTION: The bread may burn, therefore toaster must not be used near or
below curtains and other combustible materials. The toaster should be
attended when in use.
USING YOUR TOASTER
Important: Never let the toaster operate unattended.
Important: Do not operate the toaster without the crumb tray.
Toasting
1. Unwind the power cable to the required length and plug it in.
2. Use the timer knob to set the required toasting level between 1 and 6. For a
medium, golden brown colour, select level 3.
3. Place the food to be toasted in the toast slot.
4. Press the Push-down lever down until it engages. The LED on the Cancel
button lights up.
5. Toasting ends when the food being toasted is raised up. The LED on the Cancel
button goes out.
Note: The toasting can be interrupted at any time by pressing the Cancel
button. Never lift the Push-down lever to cancel toasting.
Tip: If you toast only one slice, set the toasting level lower than for two slices.
Reheating cold bread or toast
1. Insert the cold bread to be toasted
2. Press the push-down lever down until it engages. The LED on the Cancel button
lights up.
3. Press the Reheat button. The LED on the Reheat button lights up.
Toasting frozen bread
1. Select normal degree of toasting.
2. Insert the frozen bread to be toasted.
3. Press the push-down lever down until it engages. The LED on the Cancel
button lights up.
4. Press the Defrost button. The LED on the Defrost button lights up.
