Page 6 of 8
3 Instructions for Use
3.1
Fan / Fan Speed
•
Unravel the power cord and insert the plug into a standard electrical power point
and switch it on at the power point.
•
Ensuring the Timer Knob is set to Position “ON”, rotate the Speed knob on the
control panel to either position “1, 2 or 3” to turn the fan on.
Note:
Setting 1 is Low Fan Speed
Setting 2 is Med Fan Speed
Setting 3 is High Fan Speed
Setting 0 is Fan Off
3.2
Front Louvre
•
With the fan already in use, toggle the “Louvre” switch to position “Rotate” and the
front louvre will start to rotate.
•
Toggle the switch back to “Stop” at your desired position, or to simply stop the
louvre from rotating in any position.
3.3
Auto-Off Timer
Use this power-saving feature if you want the appliance to turn off automatically.
•
To select the desired Auto Off time, rotate the “Timer” knob around to the time
required, from a couple of minutes around to 120 minutes.
Note
: these times are
approximate.
•
The timer will start to count down and will turn off when the knob dial reached the
“Off” position.
Note
: The Fan knob must be set to position 1, 2 or 3 for the fan to work.
•
To turn the timer off, manually rotate the Timer Knob back around to the “Off”
position.
