Operator’s Manual
pg. 18
Rev F 5/9/17
3.
Insert Filter Bags into the instrument.
3.1
Press down the Safety Valve Handle to release the Safety Valve
Pin and rotate the Main Handle upward until it stops.
3.2
Use the Extraction Vessel Handle to pull the Extraction Vessel
out.
3.3
Slide the Extraction Vessel toward you far enough to remove the
white PTFE Insert or to put the Bag Holder directly into the
PTFE Insert while it remains in the Extraction Vessel.
It is not necessary to remove the white PTFE Insert from the Extraction Vessel in
order to put the Bag Holder in place.
3.4
Put the Bag Holder (with up to 15 bags) into the PTFE Insert.
3.5
If you removed the PTFE Insert, put it back
into the Extraction Vessel, aligning the PTFE
Insert slot with the Extraction Vessel pin.
The PTFE Insert O-ring and the Extraction Vessel O-ring must be in
place before running the instrument.
The PTFE Insert slot must be aligned with the Extraction Vessel pin
before running the instrument.
PTFE Insert O-ring
Extraction Vessel O-ring
PTFE Insert
slot and
Extraction
Vessel pin
PTFE Insert
Bag Holder
Summary of Contents for XT15
