15
AS
When a batch completes and OK ALL
triggered. Screwdriver will be locked and LCD
displays AS.
Green LED
Flicks
1 long beep
sound
NS
When an error occurs, screwdriver will be
locked and LCD displays NS.
Red LED
Flicks
1 short beep
sound
Fastening time
exceed Ht setting
(Stripped screw)
Fastening time exceed Ht setting and
screwdriver still not shut off.
Red Led
Flicks
Continue
short beep
sound
Fastening time
exceed Ht
Screwdriver shuts off but exceed Ht setting.
Red LED
Flicks
5 short beep
sounds
Fastening
completes before
Lt setting
Fastening completes before Lt setting
Red LED
Flicks
3 short beep
sounds
Low voltage
When voltage lower than 17.5V
Buzzer alarm trigger, but can still be working.
Red LED
Flicks
Continue
short beep
sound
Low voltage
When voltage lower than 17V
Buzzer alarm trigger, screwdriver cannot start
Red LED
ON
2 short 1 long
beep sound
ID identification
Fail to identify ID
Greed LED
Flicks
Red LED
Flicks
Continue
beep sound
BRAKE
Brake when forward/reverse switch set to
middle
Start disable when start triggered
Red LED
Flicks
1 short 1 long
beep sound
Wireless
controller and
screwdriver
connection status
Press Up+Down to build connection
Greed LED
Flicks
Until buttons
release
Wireless
controller and
screwdriver
connection status
Press Up+Down to stop connection between
screwdriver and wireless controller
Red LED
Flicks
Until buttons
release
Clear
Press Down 3 sec. to clear
Red LED
Flicks
Until buttons
release
Turn off screen
Press Down 5 sec to turn off LCD display
Red LED
Flicks
Until buttons
release
Turn screen back
on
Press Down 2 sec to resume LCD display
Greed LED
Flicks
Until buttons
release
Stalled
Stall protection
2 short beep
sounds
Voltage drop
Voltage drop protection
6 short beep
sounds
Sleep mode
When screwdriver idled over 30 sec., LCD
display turns off.
