background image

   

device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms or a 

device that will prove the earth circuit. 

 

WARNING: 

The machine is intended to be used at a temperature above o degree. (Only for 

machine with power cord of H05VV-F). 

WARNING: 

The operating method to be followed in the event of accident (e.g. contact with 

detergents: rinse with an abundance of clean water) or breakdown to prevent unsafe situations. 

 

WARNING: 

This machine has been designed for use with the cleaning agent supplied or 

recommended by the manufacturer. The use of other cleaning agents or chemicals may adversely 

affect the safety of the machine. 

WARNING:

 

Recommend the operator to wear ear protectors. 

 

WARNING:

 

Do not use the machine within range of persons unless they wear protective clothing. 

WARNING:

 

Do not direct the jet against yourself or others in order to clean clothes or foot-wear. 

 

WARNING: 

Risk of explosion-Do not spray flammable liquids. 

 

WARNING:

 

High pressure hoses, fittings and couplings are important for the safety of the 

machine. Use only hosed, fittings and couplings recommended by the manufacturer. 

WARNING:

 

To ensure machine safety, use only original spare parts from the manufacturer or 

approved by the manufacturer. 

WARNING: 

Water that has flown through backflow preventers is considered to the non-potable. 

 

WARNING:

 

The machine shall be disconnected from its power source by removing the plug 

from the socket-outlet during cleaning or maintenance and when replacing the machine to another 

function. 

WARNING:

 

Observe a distance of at least 30cm when using the jet to clean painted surfaces to 

avoid damaging paintwork. 

WARNING:

 

Do not use the machine if a supply cord or important parts of the machine are 

damaged, e.g. safety devices, high pressure hoses, trigger gun. 

WARNING:

 

If an extension cord is used, the plug and socket must be of watertight construction. 

WARNING:

 

Inadequate extension cords can be dangerous.

 

If an extension cord is used, it shall 

be suitable for outdoor use, and the connection has to be kept dry and off the ground. It is 

recommended that this is accomplished by means of a cord reel which keeps the socket at least 

60mm above the ground. 

WARNING:

 In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this 

appliance must not be supplied through an external switching device, such as a timer, or 

connected to a circuit that is regularly switched on and off by the utility. 

 

The machine is not intended to be connected to the potable water mains.  

WARNING:

 

To ensure the machine safety, please only use original spare parts (including nozzle) 

from the manufacturer or approved by the manufacturer. Do not use the machine before you 

changed them if they are damaged. 

Summary of Contents for APW-VAS-130P













Reviews: