10
13.Setup before Copy/Compare
I.
Set Copy Area of Source HDD
Appropriate copy area can greatly reduce operation time and have better efficiency. There are four copy modes
with different copy areas, please go to function "Copy Area".
➊
System and Files: (Quick Copy data area only)
Copies data and skips empty space. Only supports standardized formats.
Scroll to select "System and Files”, then press "OK" to save the copy method.
Allows user to copy source device’s System and Files, instead of the entire device. The system will analyze the
source device and identify the data area to copy. If the source device’s data is within the target device’s
capacity, the copy will be processed. FAT16/32/64, NTFS, EXT2/EXT3/EXT4, and HFS/HFS+/HFSX are
supported in this copy mode.
Note
Sets whether users prefer to copy unknown format or not at "6.6 Advanced Setup >> 6.6.1
Unknown Format.” Unknown format includes all forms of modified and proprietary data and
partitions.
"6.6.1 Unknown Format” only works with “6.1 Copy Area >> System and Files.”
[Copy Area]
System and Files
