Installing TRX NEON
2-5 Hardware Connections
MA8100A UG
PN: 10580-00422 Rev. E
2-3
2-5
Hardware Connections
The MA8100A TRX NEON Signal Mapper with spectrum analyzer is composed of the
hardware items shown in
. Here, an Anritsu LMR Master (S412E) is the handheld
instrument shown connected to the Android device.
Use the USB to OTG cable to connect the Anritsu spectrum analyzer to the Android device.
The Laptop or PC is used for remote monitoring and no hardware connection is required. The
NEON Tracker is a wearable remote device that has a clip that can be used to clasp onto a
user’s belt.
Refer to the In-Building Coverage Mapper Hardware Installation Guide (10580-00470) for
complete MS27101A-IBCM power-on and assembly instructions.
The NEON Tracker, Software and Android device are supplied by the user.
1. Anritsu Spectrum Analyzer (S412E)
2. Laptop or PC
3. Android Device
4. USB to OTG Cable
5. NEON Tracker
Figure 2-1.
Spectrum Analyzer Setup
Note
Requires an Android device and Windows PC, which are not included as part of
the mapping solution.
2
1
5
3
4