4-8 Signal Mapping in an Offline Building
On-Site Mapping
4-4
PN: 10580-00422 Rev. E
MA8100A UG
4-8
Signal Mapping in an Offline Building
This topic applies only to buildings flagged as offline when they were created and saved in
NEON Command. Offline building data is not uploaded to the cloud and is available in the
form of a mapping package only to users who have access to this file. Refer to
for more information.
All the tasks related to conducting an on-site signal mapping session in a private building, as
described in the previous sections, apply to an offline building. The only difference is in saving
the mapping data locally on the Android device instead of uploading it to the cloud.
When you are done collecting signal map data, tap the red button to stop recording. In the
Mapping Finished dialog, enter a name for the log file. The signal map is saved to the phone's
memory in the folder NeonSignalMaps.
4-9
Signal Maps Stored on Android Device
Signal maps that are saved locally on an Android device are stored in a folder named
NeonSignalMaps. From here, the signal maps can be uploaded to the cloud at any time.
Additionally, you can manually transfer map data collected in an offline building from the
Android device to your PC without using the NEON Cloud Service.
Upload Stored Signal Maps to the Cloud
1.
Upload Signal Maps from the Signal Mapper menu.
2.
Find the desired signal map log and select it, then Upload Selected.
3.
Open the signal map in NEON Command.
Transfer Stored Signal Maps to a PC
1.
Connect the Android device to your PC over USB.
2.
Open the external device in Windows Explorer and open the folder named
“NeonSignalMaps.”
3.
Copy the signal map file (extension .sigmap) to the appropriate location on your PC.
4.
Open the signal map in NEON Command.