General Information
1-3 System Overview
MA8100A UG
PN: 10580-00422 Rev. E
1-3
Charging LED (Bottom)
•
Solid orange – Charging
•
Solid green – Charged
•
Off – USB is disconnected
•
Blinking green/orange – Charging error
On/Off Procedure
Press the Tracking Unit power button to turn on the device. The top LED is solid green while
the unit is powering on. It blinks green when power-on is complete and the Tracker is not yet
connected to the Signal Mapper application (Anchor mode).
To turn off the Tracking Unit, press and hold the power button for at least a half-second. The
top LED is solid green while the unit is powering down and turns off when power down is
complete.
Calibration
The NEON Tracking Unit requires no user calibration. The magnetometer and gyroscope
within the device automatically calibrates while the user moves and stops.
NEON Cloud Service
Signal map logs containing measurement results with location information for the signals
that were detected and geo-referenced are uploaded to the NEON Cloud, where they are
accessible to users registered under the same NEON subscription.
Building data is also uploaded to the cloud when saved, except for offline buildings. Refer to
“Offline Buildings (Optional Feature)”
. You can download building updates made by other
users by synchronizing NEON Command or Signal Mapper with the cloud.
Android Devices
See the suggested recommended systems requirements and Android devices at the TRX
NEON website:
