4.4 FFT Graph Display
4-35
4.4.6 Interaction with signal generation application (Quick Add Mode)
The method for updating the FFT graph display in conjunction with
waveform pattern generation by a signal generation application can be
set and changed. This function is enabled only when the FFT graph
display function is activated. Click the Quick Add Mode button to display
the Quick Add Mode dialog box.
Figure 4.4.6-1 Quick Add Mode Dialog Box
■
When Add is selected:
A trace is added to the FFT graph when FFT is selected from the
Simulation menu or the FFT tool button is clicked after data generation
by the signal generation application. Note that the FFT graph display
will not be updated when the four traces are all used.
■
When Clear is selected:
A trace is deleted from the FFT graph and the FFT analysis result of the
generated data is displayed when FFT is selected from the Simulation
menu or the FFT tool button is clicked after data generation by the
signal generation application.
■
When Off is selected:
The time domain graph display will not be updated even when Time
Domain is selected from the Simulation menu or the Time Domain tool
button is clicked after data generation by the signal generation
application.
