98
8.1 Daily
Care
z
To remove surface smears from the instrument, wipe with a cloth moistened with a weak neutral
detergent solution.
z
If dirt or dust collects on the instrument, suck with a vacuum cleaner.
z
Clean head of floppy disk drive with 3.5 inch head cleaning disk set regularly.
z
If parts, such as screws, get loose, retighten them using a specified tool.
8.2 Storage
Notes
Pay attention of following points when storing the instrument for long time.
1.
Remove surface dirt, smears, and other foreign before storing the instrument.
2.
Avoid storing the instrument at +60
℃
or higher or -20
℃
or lower, or at relative humidities of
85% or higher.
3.
Avoid storing the instrument in places that are exposed to direct sunlight or that are dusty.
4.
Avoid storing the instrument in places where drops of water may collect on it or it may be af-
fected by active gases.
5.
Avoid storing the instrument in places that are liable to oxidation or subject to violent vibra-
tion.
z
Recommended long-term storage conditions
The instrument should be stored over a long period of time in an environment meeting the following
conditions, as well as those suggested above:
1.
Temperature: 5
℃
to 30
℃
2.
Relative humidity: 40% to 75%
3.
Little temperature and humidity change per day
Summary of Contents for MP1632C
