21
External display
An external display connected to the instrument provides high-resolution display images. To
connect an external display to the instrument, follow these steps.
1.
Connect an external display to the rear-panel VGA connector while the instrument is off.
2.
Turn on the instrument. The application will display on both the LCD on the instrument's front
panel and on the CRT screen of the external display.
3.
Select the ChipsCLP icon from Windows® Control Panel and run the Display Driver Control
Panel program.
4.
Select a resolution, number of colors, and font size to set the required screen condition, then spec-
ify "CRT" in the "Display" group box.
5.
The setting has been completed. Press the OK button; the Display Driver Control Panel pro-
gram exits.
Note
When you select either the CRT or LCD in the Display group box setting of the Display Control
panel program, the other not displayed. For example, when you select the CRT, the LCD on the
instrument's front panel is disabled; when you select the LCD, the CRT screen of the external
display is disabled.
Summary of Contents for MP1632C
