49
Entering data with spin boxes
You can use spin boxes and the rotary encoder to enter numeric values.
1.
Move the focus to the spin box to manipulate. When the spin box becomes the focus, a digit
of the numeric value is highlighted.
2.
Select the digit to change by moving the highlighted cursor, in either of the following ways:
・
[Press the [
←
] and [
→
] keys (on the rotary encoder).
・
Click the digit.
3.
Change the numeric value. You can change the numeric value continuously with respect to
the digit at the highlighted cursor in one of the following ways:
・
Click the spin button.
・
Turn the rotary encoder.
・
Press the [
↑
] and [
↓
] keys (on the rotary encoder).
4.
You can also enter a numeric value directly with numeric keys. In this case, the current
setting on display is entirely cleared regardless of the highlighted cursor position. The dis-
play is cleared entirely if you press the [BS] key before accepting the input data.
5.
When you have changed a numeric value directly with numeric keys, press the unit key or
the [Enter] key to accept the input data. The setting will be canceled when you do one of the
following before pressing the unit key or the [Enter] key to accept the input:
・
Move the focus to another control.
・
Close the dialog box.
・
Move to another application.
Note
When a spin box is on a panel (in the Customize subwindow), you need to enable spin box entry
by clicking the text entry enable button before changing the numeric value. The pilot lamp is on
while the entry is enabled.
Text entry enable button
Pilot lamp
Fig.
Fig.
Fig.
Fig. 5555----10
10
10
10
Spin Box on a Panel
Spin Box on a Panel
Spin Box on a Panel
Spin Box on a Panel
Summary of Contents for MP1632C
