EN
17
TROUBLESHOOTING
Problem
Possible cause
Action
The floodlight does not go on.
The switch is switched off.
Put the switch in the II (ON) or I
(AUTO) position.
The cable is loose.
Connect the cable properly to
the floodlight.
The motion detector is
misaligned.
Adjust the motion detector to
that it covers the required area.
The floodlight flashes.
Discharged battery.
Put the switch in the Off
position and allow the solar
panel to charge in direct
sunlight for 8–12 hours before
using it again.
Heat reflected from objects can
activate the motion detector.
Adjust the motion detector.
The floodlight goes on for no
reason.
The motion detector is reacting
to moving objects, e.g. trees,
traffic, etc.
Adjust the motion detector.
The floodlight shines
continuously.
The switch is in the II (ON)
position.
Put the switch in the I (AUTO)
position.
Heat reflected from objects can
activate the motion detector.
Adjust the motion detector.
