EN
30
• A fuse with a tripping current of
1.25–2.00 times the rated current of the
charge controller should be installed on
the battery side, no more than 150 mm
from the battery.
• If an inverter is used it should be
connected directly to the battery, not to
the load terminals on the charge
controller.
• For a large power requirement the
product should be used together with a
charging regulator for solar panels to
protect the battery from overcharging
and overdischarging (see figure 1).
• Several solar panels can be connected
together to achieve more power.
Continued on next page.
