EN
14
Recycle discarded product as electrical waste.
TECHNICAL DATA
Battery
1.2 V 1000 mAh Ni-MH AAA
Luminous flux
1 lm
Protection rating
IP44
ASSEMBLY
1. Mark out where to drill the holes.
2. Pull off the plastic tab between the battery and the contact
plate.
3. Fasten the solar lamp on the railing
with two screws.
NOTE:
The lamp is mounted with the solar panel facing up.
USE
NOTE:
Before the solar lamp can shine at full capacity the solar panel
must have charged the battery in direct sunlight for 24 hours.
