EN
12
PRODUCT INFORMATION SHEET
Supplier’s name or trademark:
Anslut
Supplier’s address (
a
):
Jula AB, Box 363, 532 24 SKARA
Model designation:
019937
Number of hot zones and/or surfaces:
Type of light source:
Lighting technology used:
LED
Non-directional or directional:
NDLS
Type of socket for light source (or other
electrical interface)
appliance inlets
Light source connected to mains supply or
light source not connected to mains supply:
MLS
Connected light source (CLS):
no
Light source with optional colour:
no
Casing:
no
High luminance light source:
no
Anti-glare shield:
no
Dimmable:
no
Product parameters
Parameter
Value
Parameter
Value
General product parameters:
Energy consumption in on-mode (kWh/1000
h), rounded off.
8
Energy efficiency class
E
Useful luminous flux (
Φ
use
), indicating if it
refers to the flux in a sphere (360˚), in a wide
cone (120˚) or in a narrow cone (90˚).
900 in sphere 360°
Correlated colour temperature, rounded to
the nearest 100 K, or the range of correlated
colour temperatures, rounded to the nearest
100 K, that can be set.
3000
On-mode power (P
on
), expressed in W.
8.0
Standby power (P
sb
), expressed in W and
rounded to the second decimal.
0.00
Networked standby power (P
net
) for CLS,
expressed in W and rounded to the second
decimal.
-
Colour rendering index, rounded to the
nearest integer, or the range of CRI-values
that can be set.
80
Outer dimensions without
separate driver, driver for
lighting and non-lighting
parts, where appropriate
(in mm).
Height
512
Spectral power distribution in the interval
250 nm to 800 nm, at full-load.
See figure on the next
page.
Width
24
Depth
34
Claim of equivalent power (
c
).
-
If yes, equivalent power (W)
-
Chromaticity coordinates (x and y)
0.434
0.403
Parameters for directional light sources:
Peak luminous intensity (cd)
x
Beam angle in degrees, or the range of
beam angles that can be set
[x/x…x]
Parameters for LED and OLED light sources:
R9 colour rendering index value
0
Life span factor
0.90
The lumen maintenance factor
0.96
Parameters for LED and OLED mains light sources:
Displacement factor (cos
φ
1)
0.70
Colour consistency in mcadam ellipses
6
Claims that an LED light source replaces a
fluorescent light source without integrated
ballast of a particular wattage.
(
b
)
If yes, then replacement claim (W)
-
Flicker metric (Pst LM)
1.0
Stroboscopic effect metric (SVM)
0.4
(a)”–”: not applicable.
(b)”–”: not applicable.
Summary of Contents for 019937
Page 3: ...1 2 3 4 5 6 300 mm ...
Page 4: ...7 ...
