given supervision or instruction!
> If the safety instructions are not followed, it may lead to damage to the countdown
mains timer and could cause injury!
> Only plug the countdown mains timer into a correctly fitting mains socket!
FUNCTIONAL OVERVIEW
> Intelligent time-controlled countdown mains timer with Zero Watt Technology
> No unnecessary standby power consumption
> Safe automatic mains cut-off after the user set operating time
> 15min, 30min, 1h, 2h, 4h, 8h operating times selectable
> Easy to operate with only one push button
> LED indication of the remaining operating time
> 2500 Watt or 10A maximum operating capacity
OPERATION
Plug the countdown mains timer into a suitable wall mains socket (switched on). The
countdown mains timer is ready to use, but it is still without power to the mains output.
Connect the load. Press for approx. 2 seconds the “START – STOP” push button to activa-
te the connected load for 15 minutes. Each additional press doubles the operating time
up to 8 hours. There are operating times of 15 minutes, 30 minutes, 1 hour, 2 hours, 4
hours or 8 hours selectable. The remaining operating time is indicated by the respective
LED. The time can be changed during operation by pressing the “START-STOP” button
at any time. If you want to switch off the connected load instantly, select the “8h” and
press the “START-STOP” button one more time. At this point, or when the timer expires
naturally, the “15min” LED flashes for approx. 10 seconds. Afterwards the countdown
mains timer disconnects itself automatically from the mains power and consumes no
