49
inform the user that when the DHCP client is enabling, the current IP will lose and
user should find the new IP on the DHCP server.
IP Address:
Assign the IP address that the network is using. If DHCP client function
is enabling, and then user don’t need to assign the IP address. And, the network
DHCP server will assign the IP address for the industrial switch and displays in this
column. The default IP is 192.168.1.5.
Subnet Mask:
Assign the subnet mask of the IP address. If DHCP client function is
enabling, and then user do not need to assign the subnet mask.
Gateway:
Assign the network gateway for the industrial switch. The default gateway
is 192.168.1.254.
DNS1:
Assign the primary DNS IP address.
DNS2:
Assign the secondary DNS IP address.
And then, click
Apply
IP configuration interface
DHCP Server – System configuration
The system provides the DHCP server function. Enable the DHCP server function, the
switch system will be a DHCP server.
DHCP Server:
Enable or Disable the DHCP Server function. Enable – the switch
will be the DHCP server on your local network.
Low IP Address:
the dynamic IP assign range. Low IP address is the beginning of
