Antaira Industrial Ethernet Switches
LMP-0602-24 Series User Manual V1.1
19
Terms
Value Description
Port No.
It shows each port status: Up for link active, and Down for link inactive.
Port Name
User can create or insert a value or label for each port’s identification
Status
Enable or disable a port
Speed/Duplex
User can set the bandwidth of each port as Auto-negotiation, 100 full,100
half,10 full,10 half mode.
Flow Control
Support symmetric and asymmetric mode to avoid packet loss when
congestion occurred.
Click “Apply” button to save changes.
Click to undo any changes made locally and revert to previously saved
values.
5.4PoE (Power-over-Ethernet)
LMP-0602 series is one of Antaira’s industrial PoE+ managed switches that has four built-in
IEEE802.3at complaint ports, and each PoE port would support PoE output power up to a
maximum of 30W per port. It is also backward compatible with IEEE 802.af to support any
standard PoE powered devices (PD).
5.4.1 PoE Configuration
Figure 5.14 – PoE Port Configuration Interface
Figure 5.13 – Port Configuration Description
