Antaira Industrial Ethernet Switches
LMX-1002G-SFP Series Hardware Manual V1.4
1
1. Introduction
All Antaira industrial managed switches come with a pre-
installed “user friendly” web console
interface, which allows users to easily configure and manage the units, whether one is using a serial
console and command line interface (CLI) commands like Telnet, SSH, HTTP (Web GUI) or simple
network management protocols (SNMP).
1.1 Product Overview
Antaira’s LMX-1002G-SFP series
is a 10-port industrial gigabit managed Ethernet switch that is
embedded with eight gigabit Ethernet ports and two dual rate (100/1000) SFP slots for fiber
connection. It supports Jumbo Frame up to 9.6K for huge Ethernet data packet transmissions. It is a
fully manageable Layer 2 Ethernet switch that is pre-loaded with a user-friendly web management
console design. It supports the ring network redundancy function using the market’s open standard
ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery
time. The advanced network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP,
RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network
management for remote SCADA systems or control networks.
The LMX-1002G-SFP series is a compact, IP30 rated, and DIN-rail or wall mountable. There are also
two wide operating temperature models for either a standard temperature range (STD: -10°C to 70°C)
or an extended temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD
protection for industrial networking applications, such as, power/utility, water wastewater,
oil/gas/mining, factory automation, security surveillance, ITS and any other outdoor or harsh
environment.
1.2 Product Software Features
Network Redundancy
STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for
network redundancy
Network Management
Web UI based management, SNMP v1/v2/v3, Serial Console
Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress,
broadcast storm control, Diffserv
IEEE802.1q VLAN tagging, port-based VLAN support
