Antaira Technologies - Industrial Ethernet Switches
LMX-2602G-SFP Series Hardware Manual V1.0
9
Second, insert the fiber cable of the LC connector into the transceiver as shown below in
Figure 2.7.
To remove the LC connector from the transceiver, please follow the steps shown below:
1. Press the upper side of the LC connector from the transceiver and pull it out to release as shown below in
Figure 2.8
.
2. Push down the metal clasp and pull the transceiver out by the plastic part as shown below in
Figure 2.9
.
2.8 Wiring the Power Inputs
lease follow the below steps to insert the power wire.
1.
Insert the AC power cable into the universal AC socket
as shown below in
Figure 2.10
.
2.
Switch the power switch for power on
.
Figure 2.7 - LC Connector to the Transceiver
Figure 2.8 - Remove LC Connector
Figure 2.9 - Pull Out from the SFP Module
Figure 2.10 - Power Terminal Block
