Antaira Technologies - Industrial Ethernet Switches
LMX-2602G-SFP Series Hardware Manual V1.0
13
5. Technical Specifications
Table 5.1
has the technical specifications for Antaira’s LMX-2602G-SFP series:
Standards
IEEE 802.3
10Tx Ethernet
IEEE 802.3u
100Tx Fast Ethernet
IEEE 802.3ab
1000Tx Gigabit Ethernet
IEEE 802.3z
Gigabit Fiber
IEEE 802.1d
STP (Spanning Tree Protocol)
IEEE 802.1w
RSTP (Rapid Spanning Tree)
IEEE 802.1s
MSTP
ITU-T G.8032/Y.1344
ERPS (Ethernet Ring Protection Switch) Protocol
IEEE 802.1Q
VLAN Tagging
IEEE 802.1p
QoS/Cos Protocol for Traffic Prioritization
IEEE 802.1x
Port based Network Control, Authentication
IEEE 802.1s
MSTP (Multiple Spanning Tree Protocol)
ITU-T G.8032/Y.1344
ERPS (Ethernet Ring Protection Switch) Protocol
IEEE 802.1Q
VLAN Tagging
IEEE 802.1x
Network Authentication
IEEE 802.1AB
Link Layer Discovery Protocol
Switch
Properties
Protocol
Web browser, Telnet, Serial console, TFTP,
SNMPv1/v2c/v3, Port Speed/Duplex Configuration, IPv6,
IEEE 802.1Q, GVRP, Port-based VLAN, X-Ring, 802.1w/D
RSTP/STP, IP Access security, port security, DHCP client,
Port and IP Binding, 802.1X Port Access Control
Switch Architecture
Back-Plane (Switching Fabric): 52.0Gbps
Processing Type
Store and Forward
Flow Control
IEEE 802.3x for full duplex mode, back
pressure for half duplex mode
Transfer Rate
14,880pps for 10Base-T Ethernet
148,800pps for 100Base-T Fast Ethernet
1,488,000pps for Gigabit Ethernet
Packet Buffer
4 Mbits
Jumbo Frame
9.6K
MAC Table Size
8K
VLAN Group
0 ~ 4094
IGMP Group
1024 Group
Port Interface
Ethernet Port
26*10/100/1000BaseT(X) with 24* Auto-Negotiation, Full/Half
Duplex, Auto-MDI/MDI-X
Gigabit Combo Port
(Copper/SFP)
2*RJ45 Ports w/10/100/1000Tx Ethernet and 2*100/1000 SFP
Slot
Wavelength
Depends on SFP modules
RS232 Serial Console
1*RS232 in RJ45 connector with console cable, 115.2Kbps, 8,
N, 1
